THE REFERENCE LIBRARY
Understand your home, one system at a time.
Practical explanations with worked examples, checklists and sources.
Insulation
Browse this topic05
A warmer house starts with the right diagnosis.
Find heat losses, compare insulation and avoid trapping moisture inside a wall.
Why does water collect on cold windows and walls?
Use temperature, humidity and dew point to distinguish condensation from other moisture problems.
Ventilate an airtight home without losing control of heat
Separate required fresh air, local exhaust, infiltration and heat recovery.
Estimate insulation savings without promising a false payback
Build a transparent before-and-after estimate, then separate modelled transmission savings from measured whole-home bills.
Turn a ventilation requirement into airflow and operating energy
Keep air-change assumptions, room distribution, measured fan performance and electricity use as separate checks.
Frost & ground
Browse this topic04
How deep should pipes and foundations go?
Separate frost protection, pipe cover and structural foundation design before digging.
Prepare the house before the first hard freeze.
Walk through exposed water systems, heating dependencies and outage actions while there is time to fix them.
Protect exposed pipes before relying on heat trace
Reduce exposure, insulate correctly, choose controls and plan for a power failure.
Turn frost requirements into foundation levels on site
Separate the local frost criterion, structural bearing level, final grade and excavation level before digging.
Wells & water
Browse this topic11
Will a well supply the water your home needs?
Read well logs, understand drawdown and turn flow measurements into pump and storage questions.
How much rainwater can your roof collect?
Estimate catchment yield, understand storage limits and keep rainwater separate from drinking water.
Choose a water pipe size without guessing
Connect fixture demand, internal diameter, velocity, pressure loss and pump performance.
Understand pressure, head and flow in a private water system
Measure static and dynamic pressure, include elevation and read the pump at its operating point.
Plan household water for a power or supply outage
Separate drinking water from service water, identify electrical dependencies and test a realistic operating plan.
Diagnose pressure-tank drawdown and rapid pump cycling
Use actual pressures, usable drawdown and observed run times to separate tank, switch, demand and pump problems.
Use storage to bridge a low-yield well and peak household demand
Separate sustainable source flow, stored volume and delivery pressure before sizing a cistern or break tank.
Four quick checks for a home water system
Turn pipe dimensions, tank levels, pressure settings and pump run time into four useful commissioning numbers.
Find and quantify a hidden household water leak
Use the water meter, simple isolation tests and a timed measurement to turn unexplained consumption into a repairable fault.
Reduce hot-water wait and distribution waste
Measure the water stored between heater and outlet, explain the real wait time and compare compact piping, local heating and controlled recirculation.
Read a well pumping test before sizing the pump
Keep flow, water level, elapsed time, recovery and intake position together so one attractive number does not hide a weak test.
Water treatment
Browse this topic04
Which water filters do you actually need?
Choose stages from measured contaminants, treatment goals and required flow.
Plan and verify an ion-exchange water softener
Translate a hardness result and household water use into a defensible capacity, regeneration and verification plan.
Read a private-well water test before choosing treatment
Check the sample, units, detection limits and health context before comparing equipment.
Maintain a home water-treatment train as one system
Track flow, pressure, capacity, sanitation and verification across every treatment stage.
Wastewater
Browse this topic05
Plan a septic system around the site.
Understand the tank, soil treatment area, hydraulic load and maintenance obligations.
Plan a gravity drain from elevations, not appearances
Turn a required grade into invert levels while protecting cover, access and the downstream system.
Prepare a pumped wastewater system for a power outage
Identify powered components, establish the real emergency buffer and reduce flow before sewage backs up.
Plan septic service from measured sludge and scum
Replace a generic pump-out calendar with safe measurements, local service criteria and a simple record of how the tank changes.
Plan a sump pump system for cycling, discharge and power outages
Turn measured water levels and wet-weather inflow into a maintainable pumping and backup plan.
Independent energy
Browse this topic07
Build a power plan that survives a cloudy week.
Separate energy, peak power and autonomy before sizing solar, batteries and backup.
Choose backup power around the loads that must run.
Understand running power, motor starts, safe placement and the connection to the house.
Plan domestic hot water as an energy system
Estimate heating energy, then account for peak demand, recovery, storage and safety.
Plan how an off-grid battery gets recharged
Connect usable deficit, charger power, source limits, losses and recovery time.
Plan off-grid energy through several low-sun days
Build a period energy balance, preserve battery reserve and define when backup generation starts.
Plan useful hot-water storage for a household
Translate tank litres into delivered hot water by checking temperatures, peak draws, recovery time and energy availability.
Read a grid-connected solar energy balance without mixing the meters
Use matched generation, import and export records to distinguish solar self-consumption from the solar share of household electricity, without a battery.
Construction
Browse this topic10
Estimate a concrete order without hiding the assumptions
Separate drawing dimensions, geometric volume, allowance and supplier constraints.
Plan trench quantities without treating excavation as a safe shape
Estimate spoil while keeping utilities, collapse protection, water and access as separate decisions.
Size the roof-drainage path from rainfall to safe discharge
Connect roof area and design intensity to gutters, outlets, downpipes and foundation drainage.
Measure masonry and screed before ordering materials
Turn drawings and site measurements into transparent quantities without confusing an order estimate with structural or product design.
Measure paint and tile quantities before buying
Build a checkable room finish take-off from measured surfaces, declared product coverage and explicit rounding decisions.
Measure roof pitch and covering quantities safely
Turn plan dimensions and a verified pitch into a transparent first material quantity while keeping layout and safety decisions separate.
Turn roof runoff into a buildable drainage set-out
Carry a design rainfall from the connected roof area through outlet capacity, gutter fall, overflow and final discharge.
Plan flooring and wallpaper without hiding waste
Separate measured area, effective product coverage, layout allowance and whole-pack purchasing.
Estimate plaster and drywall from a measured layout
Turn a site sketch into reviewable quantities without hiding thickness, product consumption or cutting allowance.
Plan finish details: wallpaper repeats, grout and sealant
Turn the small details that change an order into measurable inputs, not a hidden waste percentage.
Electrical power
Browse this topic02
Plan the low-voltage DC path from battery to inverter
Turn load power into current, voltage drop and runtime without treating a calculator as a cable design.
Turn a single-phase appliance load into a circuit brief
Collect the inputs an electrician needs, estimate steady current and voltage drop, and keep protection and cable selection as explicit design decisions.
Heating
Browse this topic03
Size a heat pump from the building load and cold-weather capacity
Compare load and equipment at matching temperatures, plan auxiliary heat and test the installed system.
Plan a low-temperature hydronic heating circuit
Connect room heat loss, emitter output, water flow, pump head and commissioning without treating one number as the whole design.
Plan a heating buffer tank without guessing
Separate the cycling problem, surplus heat, usable temperature range and existing system volume before selecting a tank.